Treating Heavy Oil Wastewater for Beneficial Use by Integrated Technology of Bio-Oxidation and RO
Heavy oil exploitation wastewater is characterized by its high concentration of emulsified oil, high salinity, high temperature and complex chemical components. This paper discuss a successful pilot-scale demonstration application of a unique technology integrating heat exchanger, gas floatation, biological contact oxygen, filtration, ultra-filtration, reverse osmosis at Chenzhuang oilfield. The scale of the process was about 360 m3/d, and the performance of the treatment process, the effectiveness of the technology for removal of oil and for controlling RO membranes fouling, and the economic effect are also discussed. Operation results show that the biological contact oxidation--ultra filtration process can reduce the oil contents to less than 0.5 mg/L and TDS to less than 3. The conductivity of RO effluent is below 456 μS·cm-1, the treated water can meet the required standard for steam-injected boiler, and it can also be used to prepare polymer solution for viscosity keeping.
Key words: Heavy oil wastewater; Biological contact oxygen; RO; Steam boiler; Polymer solution
 Pak, A., & Mohammadi, T. (2008). Wastewater Treatment of Desalting Units. Desalination, 222, 249–254
 Ma, S. H., Zhang, S. S., & Zhou. J. (2012). Reutilization Process Design of Baikouquan Heavy Oil Sewage. Chemical Engineer, 203, 39-42.
 Kharaka, Y. K., Leong, L. Y. C., Doran, G., & Breit, G. N. (1998). Can Produced Water be Reclaimed? In the Proceedings of the 5th International Petroleum Environmental Conference, Albuquerque, NM.
 Xu, P., & Drewes, J. E. (2006). Viability of Nanofiltration and Ultra-Low Pressure Reverse Osmosis Membranes for Multi-Beneficial Use of Methane Produced Water. Sep. Purif. Technol., 52(1), 67.
 Gulde, C. M. (2003). Performance of a Hybrid Reverse Osmosis-Constructed Wetland Treatment System for Brackish Oil Field Produced Water. Water Res., 37, 705-713.
 Wu, X. L., Huang, X. R., & Deng, Y. (2012). Status and Prospects of the Seawater Desalinization Technology. Contemporary Chemical Industry, 141, 964-967.
 Qiao, X. L., Zhang, Z. J., Yu, J. L., & Ye, X. F. (2008). Performance Characteristics of a Hybrid Membrane Pilot-Scale Plant for Oilfield-Produced Wastewater. Desalination, 225, 113-122.
 Dou, M. W., Su, B. W., Gao, X. L., & Gao, C. J. (2011). Progress in Membrane Technology for Treatment of Oilfield Produced Water. Environmental Science and Technology, 34(8), 124-130.
 Ang, W. S., Lee, S., & Elimelech, M. (2006). Chemical and Physical Aspects of Cleaning of Organic-Fouled Reverse Osmosis Membranes. J. Membrane Sci., 217, 198-210.
- There are currently no refbacks.
How to do online submission to another Journal?
If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:
1. Register yourself in Journal B as an Author
Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.
Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
email@example.com; firstname.lastname@example.org; email@example.com
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures
Address: 9375 Rue de Roissy Brossard, Québec, J4X 3A1, Canada
Telephone: 1-514-558 6138