Abrasive Wear of Geometrical Surface Structures of Scapharca Subcrenata and Burnt-end Ark Against Soil
Scapharca subcrenata(Arca subcrenala Lischke）and Burnt-end Ark (Arca inflata Reeve) were selected as the research object. The abrasive wear experiments of three types of surface structures against soil were performed in the abrasive tester. These surface structures include the Scapharca subcrenata node rib pattern shell, Scapharca subcrenata rib pattern shell and Burnt-end Ark. The test results showed that the wear-resistant function of the surface structures of the Scapharca subcrenata node rib pattern shell and the Burnt-end Ark shell was better than that of the surface structure of the Scapharca subcrenata rib pattern shell when the relative sliding velocity was 2.41m/s. When abrasive size was range from 0.380mm to 0.830mm, the wear loss of these three types of surface structures were increased with the relative sliding velocity increasing.Keywords: Scapharca subcrenata; Burnt-end Ark; geometrical surface structure; abrasive wear; wear resistance
Scapharca subcrenata; Burnt-end Ark; geometrical surface structure; abrasive wear; wear resistance
- There are currently no refbacks.
If you have already registered in Journal A and plan to submit article(s) to Journal B, please click the CATEGORIES, or JOURNALS A-Z on the right side of the "HOME".
We only use the following emails to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
email@example.com; firstname.lastname@example.org; email@example.com
Copyright © Canadian Research & Development Centre of Sciences and Cultures (CRDCSC)
Address:730, 77e AV, Laval, Quebec, H7V 4A8, Canada
Telephone: 1-514-558 6138