Study on Cement Slurry System for Deep and Ultra-Deep Wells

GAO Kai

Abstract


Cementing quality can’t meet the requirements in deep and ultra-deep wells cementing because of many factors such as long open hole section, multiple pressure system, high temperature and high pressure. In order to solve the problem of cementing in deep and ultra-deep wells, retarder and fluid loss additive were studied, then the cement slurry system for deep and ultra-deep wells were developed and the performance was evaluated. The results show that the cement slurry has steady performance for high temperature, adjustable thickening time, less fluid loss, good settlement stability, and high compressive strength, all of which can meet the requirement of cementing in deep and ultra-deep wells. Pilot tests of this cement system were conducted in more than 30 wells in Shengli, Dagang, Liaohe, Jiangsu, Jilin and Offshore oilfield, cementing qualities of these wells were qualified, which indicates that comprehensive performance of this kind of cement slurry system can meet the technical requirements for deep and ultra-deep wells cementing, which provides the references for the deep and ultra-deep wells cementing in all of the word.
Key words: Deep and ultra-deep wells; Cementing; Fluid loss additive; Retarder; Thickening time

Keywords


Deep and ultra-deep wells; Cementing; Fluid loss additive; Retarder; Thickening time

Full Text:

PDF

References


[1] Niu, Q. L., Feng, N. Q., & Yang, J. (2002). Effect of super-fine slag powder on cement properties. Cement and Concrete Research, 32, 6-15.

[2] Jain, B., Raiturkar, A. M. P., Holmes, C., & Dahlin, A. (2000). Using particle-size distribution technology for designing high-density, high-performance cement slurries in demanding frontier exploration wells in South Oman. IADC/SPE Drilling Conference, 23-25 February, New Orleans, Louisiana.

[3] Smith, M. A., et al. (1997). Slag/fly ash cements. World Cement Technology, 8, 223-233.

[4] Valchou, P. V., & Piau, J. M. (1999). Physicochemical study of the hydration process of an oil well cement slurry before setting. Cement and Concrete Research, 29(1), 27-36.

[5] Sabins, F. L., & Sutton, D. L. (1991). Interrelationship between critical cement properties and volume changes during cement setting. SPE Drilling Engineering, 6, 6-8.

[6] Roy-Delage, S., Baumgarte, C., Thiercelin, M., & Vidick, B. (2000, February). New cement systems for durable zonal isolation. IADC/SPE Drilling Conference. New Orleans, Louisiana.

[7] Morris,W., Criado, M. A., Robles, J., & Bianchi, G. (2003, April). Design of high toughness cement for effective long lasting well isolations. SPE Latin American and Caribbean Petroleum Engineering Conference. Port-of-Spain, Trinidad and Tobago.

[8] Low, N., & Dacoord, G. (2003, October). Designing fibered cement slurries for lost circulation applications: Case histories. SPE Annual Technical Conference and Exhibition. Denver, Colorado.

[9] Gu, J., & Xiang, Y. (2003). Research and application of slurry for high temperature high pressure well. Drill Fluid & Compel Fluid, 20(2), 31-32.

[10] Sabins, F. L., Tinsley, J. M., & Sutton, D. L. (1982). Transition time of cement slurries between the fluid and set states. Society of Petroleum Engineers Journal, 22(6), 875-882.




DOI: http://dx.doi.org/10.3968%2Fj.aped.1925543820140701.1856

Refbacks

  • There are currently no refbacks.


Reminder

How to do online submission to another Journal?

If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures
Address: 730, 77e AV, Laval, Quebec, H7V 4A8, Canada

Telephone: 1-514-558 6138
Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net  office@cscanada.org