The Flow Unit Division in the No.1 Fault Block of Pubei Oilfield

LIU Jiyu, SHAO Shuai, ZHAO Jiahong, WANG Tianxu

Abstract


The flow unit is a comprehensive reflection of reservoir’s physical characteristics. Based on the basic characteristics of thin narrow sand reservoir, this paper has discussed geological factors which affects seepage characteristics and studied on the flow unit division methods of the thin narrow sand reservoir. Then, the flow unit in the objective layers was studied. The objective layers in the study area were divided into 26 vertical flow units. According to the analysis of coring well and other static data, the flow unit of objective layers in the coring well was divided into four types including ClassⅠ, Class Ⅱ, Class Ⅲ and Class Ⅳ, whose classification standard was set up. For non-coring wells, the flow unit division is in accordiance with the physical parameters of well logging interpretation. Finally, the distribution figures of plane flow unit in each sedimentary unit were drawn.
Key words: Thin narrow sand body; Flow unit; Seepage characteristic; Comprehensive quantitative assessment; Reservoir; Pubei oilfield

Keywords


Thin narrow sand body; Flow unit; Seepage characteristic; Comprehensive quantitative assessment; Reservoir; Pubei oilfield

Full Text:

PDF

References


[1] Hearn, C. L., Ebanks, W. J. Jr., Tye, R. S., et al. (1984). Geological Factors Influencing Reservoir Performance of the Hartwg Draw Field, Wgoming. Journal of Petroleum Technology, 36(8), 1335-1344.

[2] Ebank, W. J. Jr. (1987). Flow Unit Concept-Integrated Approach to Reservoir Description for Engineering Projects. AAPG Annual Meeting, AAPG Bulletin, 71(5), 551-552.

[3] Amaefule, J. O., & Altunbay, M. (1993). Enhanced Reservoir Description: Using Core and Log Data to Identify Hydraulic(Flow) Units and Predict Permeability in Uncored Intervals/Well. Presented at the 68th Annual SPE Conference and Exhibition, Oct. 2-5, Houston,Texas.

[4] Qiu, Y. N., & Wang, Z. B. (1996). New Technology of Reservoir Description (pp. 62-72). Beijing: Petroleum Industry Press.

[5] Mu, L. X., Huang, S. Y., & Jia, A. L. (1996). New Technology of Reservoir Description (pp. 1-10). Beijing: Petroleum Industry Press.

[6] Liu, J. Y., Wang, J. D., & Lv, J. (2002). Flow Unit Characteristics and Its Genetic Classification. Geological Oil Experiment, 24(4), 381-384.

[7] Liu, J. Y., Feng, G. Q., Li, Q. L., & Feng, Y. C. (2009).The Flow Unit Study Review. Journal of Fault Block Oil and Gas Fields, 3, 47-49.

[8] Liu, J. Y., Peng, Z. C., & Guo, X. B. (2005).Grey Correlation Analysis Method in the Application of Reservoir Evaluation - Illustrated by the Example of Oil Fields in the North II Area of Daqing Sartu. Petroleum Geology and Recovery Efficiency, 12(2), 13-15.




DOI: http://dx.doi.org/10.3968%2Fj.aped.1925543820130602.1815

Refbacks

  • There are currently no refbacks.


Reminder

If you have already registered in Journal A and plan to submit article(s) to Journal B, please click the CATEGORIES, or JOURNALS A-Z on the right side of the "HOME".

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures
Address: 730, 77e AV, Laval, Quebec, H7V 4A8, Canada

Telephone: 1-514-558 6138
Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net  office@cscanada.org