Present Situation Research on Axial Flow Displacement Theory During Cementing

AI Chi, Yu Fahao, FENG Fuping, CHEN Dingfeng, WEI Ting

Abstract


It is well known that displacing drilling fluid effectively is the premise to obtain good cementing quality. During cementing axial flow is the major way to displace annular drilling fluid. So we put emphasis on the research of axial flow displacement theory. At present axial flow displacement theory mainly focuses on three aspects: displacement theory study based on wall shear stress; displacement theory study based on the numerical simulation technique for the displacement interface stability; displacement theory study based on laboratory experiments. In this paper, we analyzes the present research situation and their respective advantages and defects of the above mentioned three aspects in displacement theory. We put forward that infinitesimal mechanical analysis for displacement interface and numerical simulation technology for the interface stability should combine organically. In order to achieve good cementing effect, we should stress on the research and measurement of profile displacement efficiency and put the interface moving steadily as a prerequisite. As a result, our research can lay a fundamental the future development of axial flow displacement theory.
Key words: Axial flow; Displacement theory; Wall shear stress; Interface stability; Displacement efficiency

Keywords


Axial flow; Displacement theory; Wall shear stress; Interface stability; Displacement efficiency

Full Text:

PDF

References


[1] Liu, C. J., Huang, B. Z., Xu, T. T., et al. (2001). Cementing Theory and Application in Wells. Beijing: Petroleum Industry Press.

[2] Peng, M. W., Xia, H. N., Tao, Q., et al. (2006). Study and Application of Enhancing Displacement Efficiency of Cement Slurry by Using Wall Shear Stress. Fault-Block Oil & Gas Field, 13(6), 68-70.

[3] Chen, Z. X., Kou, M. F., Yu, W. H., et al. (2004). Effects of Shear Stress of Cement Slurries Adhering to Walls on Cementing Qualities. Petroleum Drilling Techniques, 32(2), 27-29.

[4] Mclea, R. H., Manry C. W., Whitaker W. W., et al. (1967). Displacement Mechanics in Primary Cementing. JPT, 1967, 251-260.

[5] Parker, P. N., Ladd, B. J., Ross, W. N., & Wahl, W. W. (1965). An Evaluation of a Primary Cementing Technique Using Low Displacement Rates. Fall Meeting of the Society of Petroleum Engineers of AIME, 3-6 October 1965, Denver, Colorado.

[6] Parker, P. N. (1969). Cementing Successful at Low Displacement Rates. World Oil J, 1969, 93.

[7] Hautand, R. C., & Crook R. J. (1979). Primary Cementing: The Mud Displacement Process. SPE Annual Technical Conference and Exhibition, 23-26 September 1979, Las Vegas, Nevada.

[8] Haut, R. C., & Crook, R. J. (1980). Primary Cementing: Optimizing for Maximum Displacement. World Oil, 11, 105-116.

[9] Haut, R. C., & Crook, R. J. (1982). Laboratory Investigation of Light Weight Low-Viscosity Cementing Spacer Fluids. Journal of Petroleum Technology, 34(8), 1828-1834.

[10] Liu, C. J., Liu, X. L., Liu, N. Z., et al. (2003). Research on Raising Slurry Displacing Efficiency in a Slim Hole. Natural Gas Industry, 23(2), 46-49.

[11] Li, Z. Y., Guo, X. Y., & Yang, Y. G. (2004). Cementing Technologies to Adjust Drilling Fluid Properties Before Cementing and Displace Mud by Turbulent Prepad Fluid at Low Return- Velocity. Drilling Fluid & Completion Fluid, 21(4), 31-33.

[12] Song, H. G., Zhang, X. Y., Hu, J. Z., et al. (2009). The Effect of Slurry Rheological Parameters on the Distribution of Slurry’s Velocity. Xinjiang Petroleum Science & Technology, 19(3), 9-11.

[13] Feng, F. P., Ai, C., Yang, F. Y., et al. (2010). A Study on The Replacement Position of Laminar Flow in Eccentric Annulus at Retention Layer Boundaries. Acta Petrolei Sinica, 31(5), 858-862.

[14] Deng, J. M., Wang, Y. H., Jia, X. B., et al. (2011). The Method to Calculate Cementing Fluids’ Density and Rheological Parameters. Petroleum Drilling Techniques, 39(5), 45-48.

[15] Zheng, Y. G., Fang, D., & Hao, J. F. (1996). A Theoretical and Experimental Study of Cementing for Horizontal Wells. Journal of Hydrodynamics, 11(1), 19-23.

[16] Feng, F. P., Ai, C., Peng, W. Y., et al. (2011). Effect of Casing Eccentricity on Displacement in Horizontal Wells. Oil Drilling & Production Technology, 33(3), 12-16.

[17] Mcpherson, S. A. (2000). Cementation of Horizontal Wellbores. SPE Annual Technical Conference and Exhibition, 1-4 October 2000, Dallas, Texas.

[18] Szabo, P., & Hassager, O. (1997). Displacement of One Newtonian Fluid by Another: Density Effects in Axial Annular Flow. International Journal Multiphase Flow, 1997(1), 113-129.

[19] Eduardo, S., Dutra, S., & Monica, F. (2004). Liquid Displacement During Oil Well Cementing Operations. Annual Transactions of the Nordic Rheology Society, 2004(1), 93-100.

[20] Dutra, E. S. S., Martins, A. L., Miranda, C. R., et al. (2005). Dynamic of Fluids Substitution While Drilling and Completion Long Horizontal Section Well. SPE Latin American and Caribbean Petroleum Engineering Conference, 20-23 June 2005, Rio de Janeiro, Brazil.

[21] Gao, Y. H., Sun, B. J., Liu, D. Q., et al. (2005). Numerical Simulation on Stability of Cement Displacement Interface in Annulus. Acta Petrolei Sinica, 26(5), 119-122.

[22] Gao, Y. H., Sun, B. J., Zhao, X. X., et al. (2007). Numerical Simulation on Influence of Rheological Property of Front Fluid on Stability of Cement Displacement Interface. Journal of China University of Petroleum (Edition of Natural Science), 31(6), 51-54.

[23] Yang, J. B., Deng, J. M., Feng, Y. Q., et al. (2008). Numerical Simulation of Effect of Density Difference on Displacement Efficiency at Low Cement Slurry Velocity. Petroleum Drilling Techniques, 36(5), 62-65.

[24] Howard, G. C., & Clark, J. B. (1948). Factors to be Considered in Obtaining Proper Cementing of Casing. D.P. P.API, 1948, 257-272.

[25] Brice, J. W., & Holmes, R. C. (1964). Engineered Casing Cementing Programs Using Turbulent Flow Techniques. JPT, 1964, 503-508.

[26] Jakobsen, J., Sterri, N., Saasen, A., et al. (1991). Displacement in Eccentric Annulus During Primary Cementing in Deviated Wells. SPE Production Operations Symposium, 7-9 April 1991, Oklahoma City, Oklahoma.

[27] Zhang, X. G., Xu, S. Q., Su, H. S., et al. (2005). The Effect of Slurry Rheopexy on Displacement Efficiency. West-China Exploration Engineering, 2005(1), 74-75.

[28] Zhang, X. G., Xu, S. Q., Chen, R. M., et al. (2005). The Effects of Flow Pattern and Contact Time on Cementing Displacement. West-China Exploration Engineering, 2005(2), 74-76.

[29] Yang, J. B., Deng, J. M., Li, Z. H., et al. Effect of Density Difference on Displacement Efficiency During Low-Rate Cementing. Petroleum Drilling Techniques, 35(5), 79-82.




DOI: http://dx.doi.org/10.3968%2Fj.aped.1925543820130602.1779

Refbacks

  • There are currently no refbacks.


Reminder

How to do online submission to another Journal?

If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures
Address: 730, 77e AV, Laval, Quebec, H7V 4A8, Canada

Telephone: 1-514-558 6138
Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net  office@cscanada.org