An Investigation of Dehydration Inefficiencies and Associated Design Challenges in a Gas Dehydration Unit: A Case Study of X Gas Plant

Stanley Ibeh, Samuel Chibueze, Boniface Obah


The value and contribution of natural gas in both domestic and economic terrains are extensive. However, its contaminant limits direct application and hence must be treated. Water vapour existing in equilibrium with dry gas is the principal among contaminants. Most corrosion both with acid gases and carbonate salts are traceable to the presence of water. Also the formation of solid icy structures called hydrates constitutes a threat to flow assurance. Removal of water by TEG dehydration trains is not uncommon.
Dehydration inefficiencies such as high water content of the outlet gas and glycol losses could impair operations and considerably reduce profit. Inefficiency in GDU was identified to be due to design factors and operational conditions/scenarios. In the case studied, laboratory analysis of TEG was combined with process simulation results to resolve inconsistencies in design and operational phases. Recommendations for further improvements were also presented.


Optimization; Dehydration; Design; TEG; savings; Water vapour

Full Text:



Alireza, B. (2003). Design of glycol unit for maximum efficiency in gachsaran oil field. Paper SPE-81121 Presented at the SPE Latin American and Caribbean Petroleum Engineering Conference Held in Port-in-Spain, Trinidad, West Indies, April, 27-30.

Arubi, I., & Duru, U. (2008). Optimizing glycol dehydration system for maximum efficiency: A case study of a gas plant in Nigeria. Paper SPE-113781 presented at CIPC/SPE Gas Technology Symposium 2008 Joint Conference held in Calgary, Alberta, Canada. 16-19, June.

Arun, G., Ansari, N., Rai, R., & Sah, A. (1996). Reduction of glycol loss from gas dehydration unit at offshore platform in Bombay offshoreA case study. Paper SPE 36225 presented at the 7th Abu Dhabi International Petroleum Exhibition and Conference held in Abu Dhabi. 13-16 October.

Campbell, J. N. (1992). Gas conditioning and processing. Campbell Petroleum Series.

Gas Processors Suppliers Association Section 20 (Dehydration). (1994/1998).

Guo, B., & Ghalambor, A. (2005) Natural gas engineering handbook. Houston TX: Gulf Professional Publishing.

Hubbard, A. A. (1991). Recent developments in gas dehydration and hydrate inhibition. Paper SPE 21507 Presented at the SPE Gas Technology Symposium held in Houston, Texas, January 23-25.

Ikoku, C. U. (1984). Natural gas production engineering. Florida: Krieger Publishing Company.

Lyons, W. (1996). Standard handbook of petroleum and natural gas engineering (Vol.2). Houston TX: Gulf Professional Publishing.

McKee, R. L., Foral, A. J., Meyer, H., Gamez J. P., & Stern S. A. (1994). Offshore dehydration of natural gas: An evaluation of alternatives. Paper SPE 7595 OTC presented at the 26th Annual OTC in Houston, Texas, U.S.A. May 2-5.

Peebles, M. W. H. (1992). Natural gas fundamentals. England: Shell International Gas Ltd

Reza, S. (2012). Gas dehydration offshore or onshore, how, how much and design tips. Paper SPE 154134 presented at the SPE International Production and Operation Conference and Exhibition held in Doha Qatar, 14-16 May.

Trina, D., Michael, C., & Adam, G. (2014). Increasing sales gas output from glycol dehydration plant. Paper SPE 171415 Presented at the SPE Asia Pacific Oil and gas Conference and Exhibition held in Adelaide, Australia. 14-16 October.



  • There are currently no refbacks.

Copyright (c) 2018 Stanley Ugochukwu Ibeh, Samuel Eleanya Chibueze, Boniface Obah

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Share us to:   


  • How to do online submission to another Journal?
  • If you have already registered in Journal A, then how can you submit another article to Journal B? It takes two steps to make it happen:

1. Register yourself in Journal B as an Author

  • Find the journal you want to submit to in CATEGORIES, click on “VIEW JOURNAL”, “Online Submissions”, “GO TO LOGIN” and “Edit My Profile”. Check “Author” on the “Edit Profile” page, then “Save”.

2. Submission

  • Go to “User Home”, and click on “Author” under the name of Journal B. You may start a New Submission by clicking on “CLICK HERE”.

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:;;

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)


Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures