HPHT 101-What Petroleum Engineers and Geoscientists Should Know About High Pressure High Temperature Wells Environment
 Al-yami, A.S., & Schubert, J. (2012). Using Bayesian Network to Model Drilling Fluids Practices in Saudi Arabia. Paper SPE -152096-MS presented at SPE International Production and Operations Conference & Exhibition, Doha, Qatar, 14-16 May 2012.
 Al-yami, A.S., Yuan, Z., & Schubert, J. (2012). Failure Probability with Time Under Different Operational Conditions for Low-Density System Based on Hollow Microspheres Supported by Long Term Lab Studies and Field Cases. Paper SPE-159141-MS presented at SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, 22-24 October 2012.
 Alfi, M., Silva, P.D., & Barrufet, M. et al. (2012). Electron-Induced Chain Reactions of Heavy Petroleum Fluids-Dominant Process Variables. Paper SPE-157882-MS presented at SPE Heavy Oil Conference Canada, Calgary, Alberta, Canada, 12-14 June 2012.
 Alfi, M., Silva, P.D., & Barrufet, M. et al. (2012). Utilization of Charged Particles as an Efficient Way To Improve Rheological Properties of Heavy Asphaltic Petroleum Fluids. Paper SPE-153528-MS presented at SPE Latin America and Caribbean Petroleum Engineering Conference, Mexico City, Mexico, 16-18 April 2012.
 Amani, M. (2012). The Rheological Properties of Oil-Based Mud Under High Pressure and High Temperature Conditions. Advances in Petroleum Exploration and Development, 3(2), 21-30.
 Amani, M., & Al-Jubouri, M. (2012). The Effect of High Pressures and High Temperatures on the Properties of Water Based Drilling Fluids. Energy Science and Technology, 4(1), 27-33.
 Amani, M., & Al-Jubouri, M.J. (2012). An Experimental Investigation of the The Effects of Ultra High Pressures and Temperatures on the Rheological Properties of Water-Based Drilling Fluids. Paper SPE-157219-MS presented at International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production, Perth, Australia, 11-13 September 2012.
 Anna, D. ( 2006). DOE Selects Projects Targeting Deep Natural Gas Resources, Research Focuses on High-Tech Solutions to High Temperature, Pressure Challenges. Retrieved from http://www.netl.doe.gov/publications/press/2006/06036-Deep_Drilling_Technology_Awards.html
 CBI Conference Centre. (2012). 8th Annual HPHT Wells Summits, London, UK. Retrieved from http://www.hphtwells.com/Event.aspx?id=777792
 Wray, B., Bedford, D., Leotaud, L., & Hunter, B. (2009). Case Studies: High-Density Elastic Cements Applied to Solve HPHT Challenges in South Texas. Completing the Well, Innovating While Drilling, 11/12.
 Bergerot, J.L. (2012). Technologie Forage – Puits HPHT. Retrieved from http://aftp.ecritel.net/_upload/ressources/programme_conferences/gep_aftp_spe_08_02_2012.pdf
 Colwell, C., Crenshaw, J., &Bland, B. (2011). Haynesville Drilling Challenges Addressed Through MPD. World Oil, 232(10), 47-54.
 Bottazzi, F. , Pichierri, G. , & Verga, F. (2007). Subsea Well Testing in HPHT Conditions, San Donato Milanese. Retrieved from http://areeweb.polito.it/ricerca/petroleum/presentazioni/0607/Subsea%20Well%20Testing%20in%20HPHT_Pichierri_COMP.pdf
 Davani, E., Kegang, L., & Teodoriu, C. et al. (2009). Inaccurate Gas Viscosity at HP/HT Conditions and its Effect on Unconventional Gas Reserves Estimation. Paper SPE-122827-MS presented at Latin American and Caribbean Petroleum Engineering Conference, Cartagena de Indias, Colombia, 31 May-3 June 2009.
 Davani, E., Ling, K., & Teodoriu, C. et al. 2009. More Accurate Gas Viscosity Correlation for Use at HPHT Conditions Ensures Better Reserves Estimation. Paper SPE-124734-MS presented at SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, 4-7 October 2009.
 Department of Energy. (2012). 2012 Annual Plan Ultra-Deepwater and Unconventional Natural Gas and Other Petroleum Resources Research and Development Program. Retrieved from http://www.fossil.energy.gov/programs/oilgas/ultra_and_unconventional/index.html
 Elkatatny, S., Moajil, A.M.A., & Nasr-El-Din, H.A. (2012). Evaluation of a New Environmentally Friendly Treatment to Remove Mn3O4 Filter Cake. Paper SPE-156451-MS presented at IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Tianjin, China, 9-11 July 2012.
 Gjonnes, M., & Myhre, I.G. (2005). High Angle HPHT Wells. Paper SPE-95478-MS presented at SPE Latin American and Caribbean Petroleum Engineering Conference, Rio de Janeiro, Brazil, 20-23 June 2005.
 Guo, Q., Ji, L., & Rajabov, V. et al. (2012). Shale Gas Drilling Experience and Lessons Learned From Eagle Ford. Paper SPE-155542-MS presented at SPE Americas Unconventional Resources Conference, Pittsburgh, Pennsylvania USA, 5-7 June 2012.
 Guo, Q., Ji, L., & Rajabov, V. et al. (2012). Marcellus and Haynesville Drilling Data: Analysis and Lessons Learned. Paper SPE-158894-MS presented at SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, 22-24 October 2012.
 Hosseini, B.K., Ardali, M., & Chalaturnyk, R.J. et al. (2011). A New Analytical Approach To Investigate Heated Area in Thermal Recovery Techniques. Paper SPE-148836-MS presented at Canadian Unconventional Resources Conference, Alberta, Canada, 15-17 November 2011.
 Jafarpour, B., & Tarrahi, M. (2011). Critical Evaluation of the Ensemble Kalman Filter for Reservoir Parameter Estimation under Incorrect and Uncertain Prior Models. Paper SPE-143062-MS presented at SPE EUROPEC/EAGE Annual Conference and Exhibition, Vienna, Austria, 23-26 May 2011.
 Joshi, K. (2012). Comparison of Various Deterministic Forecasting Techniques in Shale Gas Reservoirs With Emphasis on the Duong Method (Master’s Dissertation). Texas A&M University, College Station, Texas, USA.
 Joshi, K., & Lee, W.J. (2013). Comparison of Various Deterministic Forecasting Techniques in Shale Gas Reservoirs. Paper SPE-163870-MS presented at SPE Hydraulic Fracturing Technology Conference, Woodlands, Texas, USA, 4-6 February 2013.
 Kashfi, M.S. (1992). Geology of the Permian “Supergiant” Gas Reservoirs in the Greater Persian Gulf area. Journ. Petrol. Geol., 15, 465-480.
 Ayling, L.J., Jenner, J.W., & Elkins, H. (2002). Continuous Circulation Drilling. Paper OTC-14269-MS presented at Offshore Technology Conference, Houston, Texas.
 Lee, J., Shadravan, A., & Young, S. (2012). Rheological Properties of Invert Emulsion Drilling Fluid Under Extreme HPHT Conditions. Paper SPE-151413-MS presented at IADC/SPE Drilling Conference and Exhibition, San Diego, California, USA, 6-8 March 2012.
 Maldonado, B., Arrazola, A., & Morton, B. (2006). Ultradeep HP/HT Completions: Classification, Design Methodologies, and Technical Challenges. Paper OTC-17927-MS presented at Offshore Technology Conference, Houston, Texas, - 2006.
 Moe, G.R., Johnson, C.K., & Ingle, R. et al. (2003). Innovative Well Completion Harnesses Deep, Hot South Texas Gas. Paper SPE 84514 presented at SPE Annual Technical Conference and Exhibition, Denver, Colorado, 5-8 October 2003.
 Nareh’ei, M.A., Shahri, M.P., & Zamani, M. (2012). Preparation and Characterization of Colloidal Gas Aphron based Drilling Fluids Using a Plant-based Surfactant. Paper SPE-160888-MS presented at SPE Saudi Arabia Section Technical Symposium and Exhibition, Al-Khobar, Saudi Arabia, 8-11 April 2012.
 Ogbonna, F.J., & Iseghohi, P.T. (2009). Research and Development: Utilization of Local Additive in the Cementation of HPHT Wells in Nigeria. Paper SPE-128608-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 3-5 August 2009.
 Ohme, B. (2007). Deep Trek High Temperature Electronics Project, Development of Silicon-On-Insulator (SOI) High Temperature Electronics. Retrieved from http://seca.doe.gov/technologies/oil-gas/publications/EPreports/NT41834_FinalReport.pdf#page=64
 Payne, M. (2010). HP/HT Challenges. Retrieved from http://www.spe.org/jpt/print/archives/2010/04/17HPHTFocus.pdf
 Payne, M.L., Pattillo, D., & Miller, R. et al. (2007). Advanced Technology Solutions for Next Generation HPHT Wells. Paper IPTC-11463-MS presented at International Petroleum Technology Conference, Dubai, U.A.E., 4-6 December 2007.
 Proehl, T., & Sabins, F. (2006). Drilling and Completion Gaps for HP/HT Wells in Deep Water. Society of Petroleum Engineers.
 Radwan, A.M., & Karimi, M. (2011). Feasibility Study of Casing Drilling Application in HPHT Environments; a Review of Challenges, Benefits, and Limitations. Paper SPE-148433-MS presented at SPE/IADC Middle East Drilling Technology Conference and Exhibition, Muscat, Oman, 24-26 October 2011.
 Rajabov, V., Miska, S.Z., & Mortimer, L. et al. (2012). The Effects of Back Rake and Side Rake Angles on Mechanical Specific Energy of Single PDC Cutters with Selected Rocks at Varying Depth of Cuts and Confining Pressures. Paper SPE-151406-MS presented at IADC/SPE Drilling Conference and Exhibition, San Diego, California, USA, 6-8 March 2012.
 Shadravan, A., Khodadadian, M., & Roohi, A. et al. (2009). Underbalanced Drilling in Depleted Formation Achieves Great Success: Case Study. Paper SPE-119211-MS presented at EUROPEC/EAGE Conference and Exhibition, Amsterdam, The Netherlands, 8-11 June 2009.
 Shadravan, A., Nabaei, M., & Amani, M. (2009). Dealing with the Challenges of UBD Implementation in Southern Iranian Oilfields. Paper SPE SPE-125281-MS presented at SPE/IADC Middle East Drilling Technology Conference & Exhibition, Manama, Bahrain, 26-28 October 2009.
 Shadravan, A., Nabaei, M., & Amani, M. (2009). Utilizing UBD Technology for Future Development of Parsi Oilfield, Challenges and Opportunities. Paper SPE-123270-MS presented at Offshore Europe, Aberdeen, UK, 8-11 September 2009.
 Shahri, M.P., Tehrani, M.M., & Namvar, M. (2011). Modeling and Numerical Analysis of Mud Filtration for a Well with a Finite-Conductivity Vertical Fracture: Based on Convection-Dispersion Filtrate Transport. Paper SPE-150784-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 30 July - 3 August 2011.
 Shahri, M.P., & Zabihi, S.H. (2012). A New Model for Determining the Radius of Mud Loss During Drilling Operation in a Radial Fractured Network. Paper SPE-163028-MS presented at Nigeria Annual International Conference and Exhibition, Lagos, Nigeria, 6-8 August 2012.
 Shahri, M.P., Zeyghami, M., & Majidi, R. (2011). Investigation of Fracture Ballooning and Breathing in Naturally Fractured Reservoirs: Effect of Fracture Deformation Law. Paper SPE-150817-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 30 July - 3 August 2011.
 Teodoriu, C., Yuan, Z., & Schubert, J. et al. (2012). Experimental Measurements of Mechanical Parameters of Class G cement. Paper SPE-153007-MS presented at SPE/EAGE European Unconventional Resources Conference and Exhibition, Vienna, Austria, 20-22 March 2012.
 Vazquez, G., Blanco, A.M., & Colina, A.M. (2005). A Methodology to Evaluate the Gas Migration in Cement Slurries. Paper SPE-94901-MS presented at SPE Latin American and Caribbean Petroleum Engineering Conference, Rio de Janeiro, Brazil, 20-23 June 2005.
 Yetunde, S., & Ogbonna, J. (2011). Challenges and Remedy for Cementing of HPHT Wells in Nigerian Operation. Paper SPE-150751-MS presented at Nigeria Annual International Conference and Exhibition, Abuja, Nigeria, 30 July - 3 August 2011.
 Yuan, Z., Al-yami, A.S., & Schubert, J.J. et al. (2012). Cement Failure Probability under HPHT Conditions Supported By Long Term Laboratory Studies and Field Cases. Paper SPE-154746-MS presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8-10 October 2012.
 Yuan, Z., Schubert, J., & Teodoriu, C. et al. (2012). HPHT Gas Well Cementing Complications and its Effect on Casing Collapse Resistance. Paper SPE-153986-MS presented at SPE Oil and Gas India Conference and Exhibition, Mumbai, India, 28-30 March 2012.
 Zamora, M., & Roy, S. (2000). The Top 10 Reasons to Rethink Hydraulics and Rheology. Paper SPE 62731 presented at IADC/SPE Asia Pacific Drilling Technology, Kuala Lumpur, Malaysia, 11-13 September 2000.
 Zamora, M., Roy, S., & Slater, K. et al. (2012). Study on the Volumetric Behavior of Base Oils, Brines, and Drilling Fluids Under Extreme Temperatures and Pressures. Paper SPE-160029-MS presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8-10 October 2012.
- There are currently no refbacks.
If you have already registered in Journal A and plan to submit article(s) to Journal B, please click the CATEGORIES, or JOURNALS A-Z on the right side of the "HOME".
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases: email@example.com; firstname.lastname@example.org; email@example.com
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures
Address: 730, 77e AV, Laval, Quebec, H7V 4A8, Canada
Telephone: 1-514-558 6138