The Bench Test and Field Test of Rotary Steering Motor (RSM) System
Rotary steering system may improve drilling speed, reduce downhole accidents and decrease drilling cost greatly when it is used to drill extended reach well and multilateral horizontal well. The feature and components of Rotary Steerable Motor (RSM)system are first briefly introduced in this paper : it consists of rotary steerable head, mud motor and flex sub and works in Push the Bit mode, steering or non-steering condition and each blade are controlled by using independent electromagnetic valves, mud motor provides power for bit and the hydraulic system by driving shaft; then the pre-test procedures, test set-up and procedures of bench test are described in detail: including blade sequence test, blade firing delay time test and acceptance test of RSM system, finally the note and analysis of the field tests of RSM system in ShengLi Oil Field are enumerated. The bench tests and field tests show that control method of this system is simply, reliable and easily realizable, with improvements this system will be used in practical application soon.
Key words:Rotary Steering Motor (RSM) System; Mud motor; Bench test; Field test; Steering blade
 Thorogood, J., Aldred, W., & Florence, F., Iversen, F. (2009). Drilling Automation: Technologies, Terminology and Parallels with Other Industries. SPE/IADC Drilling Conference and Exhibition, 17-19 March 2009, Amsterdam, The Netherlands.
 Xiong, J. Y., Wen J. W., & Rong J. G., et al. (2010). New Progress in the Research of Rotary Steerable Drilling Technology. Natural Gas Industry, 30(4), 87-90.
 Poli, S., & Donaco, F., Joachim, O., & Detlef, R. (1998). Advanced Tools for Advanced Wells: Rotary Closed-Loop Drilling System-Results of Prototype Field Testing. SPE Drilling & Completion, 13(2), 67-72.
 Xie, H. M., Zhou, J., & Yue, Y. Z. (2010). Research on the Power System Used for Rotary Navigation Drilling Device. Drilling & Production Technology, 33(4), 5-7.
 Yang, Q. J., Han, L. J., & Ge, P., et al. (2008). A Discussion on Controlling Accuracy of Rotary Steering Motor. Oil Drilling & Production Technology, 30(4), 21-23.
 Tang, N., Huo, A. Q., & Wang, Y. L. et al. Development of Downward Communication Receiving Function in Rotary Steerable Drilling System. Acta Petrolei Sinica, 31(1), 157-160.
 Zhang, S. H., & Di, Q. F. (2000). Petroleum Engineering Drilling Extended Reach Well with Rotary Steering Drilling System. Acta Petrolei Sinica, 21(1), 76-80.
 Xie, H. M., Zhou, J., & Yue Y. Z. (2010). Research on the Power System Used for Rotary Navigation Drilling Device. Drilling & Production Technology, 33(4), 5-7.
 Han, L. J., Sun, M. X., & Li, Z. H. (2003). Introduction of Static Bias Push-The-Bit Rotary Naviyational System. Oil Field Equipment, 32(6), 4-7.
 Downton, G., Hendricks, A., Klausen, T. S., Pafitis, D. (2000). New Directions in Rotary Steerable Drilling. Oilfield Review, 12(1), 18-29.
- There are currently no refbacks.
If you have already registered in Journal A and plan to submit article(s) to Journal B, please click the CATEGORIES, or JOURNALS A-Z on the right side of the "HOME".
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
firstname.lastname@example.org; email@example.com; firstname.lastname@example.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures
Address: 758, 77e AV, Laval, Quebec, H7V 4A8, Canada
Telephone: 1-514-558 6138