Rock-Cutting Performance Experimental Research of Particle Water Jet Based on Orthogonal Experimental Method

Guodong JI, Haige WANG, Lulin KONG, Ming Ren

Abstract


Particle Impact Drilling is an efficient drilling technology for deep-well hard formation which cuts rock mainly by high-speed spherical particle impacting rock with the help of hydraulic action and mechanical action. In order to determine main influence factors and their order of priority, the orthogonal experiment was designed and the experimental data was analyzed with both the general method and the variance method. The analysis indicates that the order of priority of the main influence factors of particle water jet rock-cutting performance is pump pressure ps, impacting range S, particle mass concentration ω, confining pressure P and particle diameter dp. Moreover, ps is highly important and S and ω are important. In addition, high ps, moderate S, moderate ω, moderate dp and low P could effectively promote particle water jet to impact and cut rocks.
Key words: Deep hard formation; Particle impact drilling; Particle water jet; Rock-cutting performance; Orthogonal experiment method; Analysis of variance

References


[1] Tibbitts, G. A., & Galloway, G. G. (2008). Particle Drilling Alters Standard Approach. Special Focus: Drilling and Well Completion, 229(6).

[2] Xu, Y.J., & Zhao, H.X. et al. (2009). Numerical Analysis on Rock Breaking Effect of Steel Particles Impact Rock. Journal of the University of Petroleum, 33(5), 68-71.

[3] Ni, H.J., & Du, Y.K. et al. (2008). Study on the Lab Experiment of Pulsed Abrasive Water Jet Using Bottom Hole Cuttings. Oil Drilling & Production Technology, 30(5), 25-28.

[4] Shen, Z.H. (1998). Theory and Technique of Water Jet. Dongying: China University of Petroleum Press.

[5] Wu, K.S., & RONG, M. et al. (2008). Simulation Study of Rock Breaking for Particle Impact Drilling. China Petroleum Machinery, 36(2), 9-11.

[6] Zheng, S.H., & JIANG, F.H. (2003). Test Design and Data Process. Beijing: China Building Industry Press.

[7] Jin, L.C. (1988). Orthogonal Experiment Design and Multi-Factor Analysis. Beijing: China Railway Press.

[8] Hua, Z.S., & Tang, H. et al. (2002). Orthogonal Test Design Method’s Application in Car Braking System. Operations Research and Management Science, 11(6), 60-65.

[9] Wang, H.Y., & Lian, Z.W. et al. (2004). Orthogonal Experiment Method’s Application in Airflow Organization Design. Journal of Institute of Architectural Engineering, 25(1), 49-53.

[10] Sheng, Z., & Xie, S.Q. et al. Statistical Theory and Methodology in Science and Engineering. Beijing: China Higher Education Press.

[11] Yang, Y.F., & Hu, S.G. et al. (2006). Erosion Performance Experimental Research of Submerged Abrasive Water Jet Based on Orthogonal Experimental Method. Chinese Quarterly of Mechanics, 27(2), 311-316.


Full Text: PDF

Refbacks

  • There are currently no refbacks.


 

Reminder
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

Copyright © 2010 Canadian Research & Development Center of Sciences and Cultures
Address: 758, 77e AV, Laval, Quebec, H7V 4A8, Canada

Telephone: 1-514-558 6138
Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net  office@cscanada.org